Zhuzhou Wei Ye Cemented Carbide Co., Ltd.
Zhuzhou Weiye Cemented Carbide Industrial Co., Ltd.
Add to Cart
Solid Inside Tungsten Carbide Bar Rod For Hole Boring Cutter Tools
Tungsten carbide rods are mostly applied for drill bits, end mills, and reamers with sub-micron grain grade YG10X, for non-ferrous precision cutting and wood cutting with grade YG6X, and for fiberglass reinforced plastics, titanium alloys, hardened steel with ultra-fine grain grade YG8X, etc.
Product Description
1. Sintered carbide rods, blank carbide rods, highly polished carbide rods are all available;
2. Full requirement for the tolerance can be met;
3. All grades of carbide material can be offered;
4. With the advanced imported mahcines and skilled tehnologies, quality guaranteed;
5. Good service offered.
Diameter:
type |
dimension(mm) | |||
diameter(mm) |
diameter tolerance(mm) |
length(mm) |
length tolerance(mm) |
|
| Ф4*L | 4 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф4.5*L | 4.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5*L | 5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф5.5*L | 5.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6*L | 6 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф6.5*L | 6.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7*L | 7 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф7.5*L | 7.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8*L | 8 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф8.5L | 8.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9*L | 9 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф9.5*L | 9.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10*L | 10 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф10.5*L | 10.5 | +0.3~0.4 | 10~300 | 0~+3 |
| Ф11*L | 11 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф11.5*L | 11.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12*L | 12 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф12.5*L | 12.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13*L | 13 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф13.5*L | 13.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14*L | 14 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф14.5*L | 14.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15*L | 15 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф15.5*L | 15.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16*L | 16 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф16.5*L | 16.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17*L | 17 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф17.5*L | 17.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18*L | 18 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф18.5*L | 18.5 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф20*L | 20 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф22*L | 22 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф25*L | 25 | +0.4~0.6 | 10~300 | 0~+3 |
| Ф30*L | 30 | +0.4~0.6 | 10~300 | 0~+3 |